Silicone elastomer for molds - 6 SHORES (medium hardness), white. 20 kg pack + 1000 g catalyst (included).
Silicone for the manufacture of plaster molds, wax (lost wax casting process), candles, cement, polyester and polyurethane resins, and other materials.
Working time: approximately 30 minutes
Demoulding time: 24 hours
Characteristics:
- Highly non-stick and extremely faithful in reproducing details
- easy to use
- little sensitive to humidity
- contained linear retreats
- good mechanical properties
APPLICATIONS
- Candles
- Restoration and architectural elements
- Crafts and applied arts (handcrafted candles, figurines, general objects)
- Reconstructed stone
- Technical stone panels
- Faux stone accessories
- Decorative elements for interiors and exteriors
- Scenographic effects (masks, theatrical and cinematographic elements, etc.)
- Industrial applications (gaskets, shims, insulation and protective solutions, etc.)
For the technical and safety data sheet see the attachments.
How to use:
- check that the temperature of the silicone and catalyst is at least 25°C (if it has been stored at lower temperatures, for example in winter, heat it by placing it on a heat source such as a radiator)
- carefully mix the liquid silicone rubber with the 5% catalyst supplied with a spatula (for example 50 g for 1 kg of silicone) - Attention: from the moment the catalyst is added to the silicone you only have 10 minutes to pour it on the model to be reproduced
- pour into the container where the object to be reproduced was placed (fix the object to the bottom of the container with glue)
- wait 5-6 hours for the silicone to harden (during these hours the temperature must remain around 25°C - if the temperature is lower the hardening time will be longer)
To speed up the hardening you can either increase the percentage of catalyst a little (up to 6.5/7%) or put the finished piece (silicone mixed with the catalyst and shape to be copied) in the oven at 50/60°C.
No safety data sheet available for this product.
